E-mail us

72" (1.83 m) diameter x 113" (2.87 m) tan to tan PATTERSON Half Pipe Jacketed Stainless Steel Reactor for American Chemicals Manufacturer.

54" (1.37 m) diameter x 132" (3.35 m) tan to tan PATTERSON Stainless Steel Reactor For High Pressure Service.

60" (1.5 m) diameter x 19'6" (5.95 m) long 304 SS Multi-Zone Jacketed Polymerization Reactor complete with custom designed Agitator and Internal Cooling Pipes Arrangement.

84" (2.13 m) diameter x approx. 25'0" (7.75 m) long 3" (75 mm) thick PATTERSON Heavy Wall 316L Stainless Steel Autoclave Reactor for Chemical Processing.

100 USG PATTERSON Hastelloy C276 Jacketed
Reactor complete with PATTERSON 1-1/2 HP
explosion proof, top entry, turbine type agitator
suitable for VFD operation and including shaft
seal cooling system for medium degree of agitation,
dispersing and dissolving of solids in a base fluid.

Reactor ready for shipment.

300 USG PATTERSON Hastelloy C276 Jacketed Reactor with insulation complete before it is being covered with polished stainless steel sheathing.

Top view of 100 USG PATTERSON Reactor ready for shipment.

Close up of top view of PATTERSON Hastelloy Reactor.

Top view of Reactor installed in Pharmaceutical Plant.

Bottom view of PATTERSON Hastelloy 100 USG Reactor installed in Pharmaceutical Plant.

Close-up of bottom view of 300 USG PATTERSON Hastelloy Reactor installed in Pharmaceutical Plant.

Dimple Jacketed Stainless Steel Vessel

Caustic Soda Evaporator 54" ID x 200" high, material of construction Carpenter 20, Operating Pressure 150 psi at 15°C including PATTERSON flange mounted 5 HP Agitator with 26" propeller rotating at 230 rpm ready for shipment.

View of bottom of Heat Exchanger section with cone bottom removed.

Inside top view of Evaporator.

Close-up of top flange.

Bottom view of Evaporator.

Under test with Agitator running.

Fully assembled.

Ready for shipment.

PATTERSON 11' 7" (3.53 m) I.D. x 23'0" (7.00 m) overall length Rotary Furnace for the recycling of lead from batteries. This massive piece of equipment has a large split type precision machined girth gear and also heavy precision machined forged tires. The overall weight of the equipment is over 40 tons and had to be shipped on a specialized "Low Boy" trailer to clear bridges despite special routing that had to be arranged.

Rotary Furnace being shipped.

Rotary Furnace being installed.

Four only PATTERSON 8,000 litre Mixing Vessels complete with 15 HP PATTERSON Turbine Agitators.

PATTERSON 2,000 litre Mixing Vessel complete with 7-1/2 HP PATTERSON Turbine Agitator.