E-mail us 


6400 lb (3000 kg) capacity PATTERSON®  Autoclave (Pressurized) Grease Kettle complete with PATTERSON® Double Motion Agitator Arrangement ready for shipment and later installed in a Thailand Plant.

40000 lbs (18140 kg) capacity PATTERSON® Autoclave (Pressurized) Grease Kettle complete with PATTERSON®  Double Motion Agitator Arrangement at Southern U.S.A. Manufacturing Grease Plant.


400 lb (180 kg) capacity Pre-Production size Atmospheric type PATTERSON®  Grease Kettle complete with PATTERSON® Double Motion Agitator Arrangement for a Canadian Grease Plant R&D Facility.

 

 

 

 

 

3 PATTERSON®  Autoclave (Pressurized) Type Grease Kettles, 75 lb (34 kg), 115 lb (52 kg) and 190 lb (86 kg) capacity Skid Mountedcomplete with PATTERSON®  Double Motion Agitator Arrangements including Thermal Fluid Heating/Cooling Systems and Grease Discharge Pumps.  Destined for installation in a Pilot/Research Facility of a major US Oil Company.

 

 

 


 

Thailand Plant Installation with 6600 lb (3000 kg) and 13230 lb (6000 kg) PATTERSON®  Autoclave (Pressurized) Grease Kettles complete with Double Motion Agitator Arrangements and PATTERSON® 750 USG (2800 litre) Reactor.

 

PATTERSON® 5000 lb Atmospheric type Jacketed Double Motion Grease Kettle exported to China.

 

PATTERSON® 15000 lb Autoclave-type Jacketed Double Motion Grease Kettle for a North American Grease manufacturer.

 

PATTERSON® 6600 lb Autoclave type Jacketed Double Motion Grease Kettle exported to Thailand.

 

PATTERSON® 15000 lb Autoclave type Double Motion Jacketed Grease Kettle complete with Pressure Lubricator and Control Panel.  Exported to a multinational Oil Company in Thailand.

 

Grease Plant in Thailand - PATTERSON® supplied two 6400 lb PATTERSON® Double Motion Grease Kettles plus 650 USG PATTERSON® Reactor. 

 

3000 lb PATTERSON® Atmospheric-type Jacketed Double Motion Grease Kettle for a Multinational Oil Company in Texas.

 

40000 lb PATTERSON® Autoclave-type Jacketed Double  Motion Grease Kettle for another multinational oil company in Texas.  This is one (1) of three (3) units supplied.


PATTERSON® Autoclave type 50 kg working capacity Jacketed Grease Saponification/Finishing Kettle with Double Motion Counter Rotating Agitator Stirrer.  Mixing capacity 15 USG (56 litres), Operating Conditions: 90 psig and full vacuum @ 240°C.  Designed and manufactured to ASME Code.

 

Above PATTERSON® Autoclave type 50 kg working capacity Jacketed Grease Saponification/Finishing Kettle installed in a Pilot Plant of a major US oil company.


Double Motion Counter Rotating Assembly being inserted into vessel.

 

PATTERSON® 3200 USG Atmospheric Double Motion Grease Kettle with 100 psig heating jacket at 500deg.F, undercoated with special heat resistant paint.

 

Stirrer under fabrication.

 

Stirrer ready for insertion into kettle.

 

Inside view of kettle with PATTERSON®  product loaded type Teflon Scrapers installed.

 

Close up of Anchor Stirrer Shaft and Impeller Shaft Seals.

 

PATTERSON®  Atmospheric type 3200 USG working capacity Jacketed Double Motion Grease Kettle with 100 psig, single zone, conventional spiral baffle jacket over 62 “ of shell straight side and bottom head.

 

PATTERSON® Atmospheric type 3200 USG working capacity Jacketed Double Motion Grease Kettle loaded ready for shipment.

 

6000 lb PATTERSON® Autoclave-type Jacketed Double Motion Grease Kettle installed at a Lubricants Plant in Abu Dhabi, U.A.E.

 

13230 lb PATTERSON® Autoclave-type  Jacketed Double Motion Grease Kettle exported to India.

 

One PATTERSON®  Atmospheric type 1215 USG (4,600 l) Working Capacity Jacketed Cooling Grease Kettle c/w  PATTERSON® Counter Rotating Stirrer and Product Loaded Scraper

And One PATTERSON® Atmospheric type 1,427 USG (5,400 l) working capacity Jacketed Grease Mixing Kettle c/w PATTERSON® Counter Rotating Stirrer and Product Loaded Scrapers.

 

 

PATTERSON®  Jacketed Grease Kettle c/w Double Motion Stirrer, 1,427 USG (5,400 l).

 

PATTERSON®  Grease Kettle Shell under fabrication.

 

PATTERSON® Grease Kettles being unloaded from container and installed at Far East Lubricating Products Plant.

 

PATTERSON® Grease Kettle being lifted out of the container.
 

 

 

 

PATTERSON® Grease Kettle being lifted on to transport truck.

 

PATTERSON® Grease Kettle lowered inside plant for installation.

 

PATTERSON® 2640 USG (10000 l) capacity Grease kettle, Atmospheric type, Jacketed including Variable Frequency Drive System.

 

PATTERSON®  Atmospheric 2650 USG (10,000 l) Jacketed Grease Finishing/Cooling Kettle with 50/40 HP Double Motion Counter Rotating Stirrers and Special Leading Edge Scrapers for Extra Heavy Viscosity Grease.

 

Close up of PATTERSON® 4" Flush Bottom Full Port Discharge Valve "Closed Position"

 

Close up of PATTERSON® 4" Flush Bottom Full Port Valve in "Open Position"

 

PATTERSON®  Atmospheric Type 3200 USG (12,100 l) 28,000 lb Jacketed Grease Kettle with Double Motion Counter Rotating Agitator Stirrer 50/40 HP

 

PATTERSON®  Double Motion Counter Rotating Agitator Stirrer with proprietary product loaded scrapers including kettle cover assembly to fit an existing Finishing/Cooling Kettle in customer's plant.

 

View of Kettle cover with Agitator in test mode.

 

Top View of Kettle cover with Double Motion Drives.

 

Close-up of bottom steady bearing.

 

PATTERSON®  4 MT Autoclave type Jacketed Grease Saponification Kettle designed for 100 psig and FV to 550°F (288°C).

 

Top view of Kettle opening with close-up of coupling/mechanical seal.

 

Close-up of Kettle top with Double Motion Drive

 

Lubricating/Cooling unit for Mechanical Seal.

 

Close -up of  PATTERSON® Flush Bottom Valve with Pneumatic Actuator.
PATTERSON®  Atmospheric type 5000 litre working capacity Jacketed Grease/Finishing Cooling Kettle with 2 zone jacket, complete with Double Motion Counter Rotating Agitator Stirrer.
Inside view of Double Motion Counter Rotating Stirrer arrangement with product loaded Teflon scrapers.
View of PATTERSON® special Hand Wheel operated Flush Bottom Discharge Valve.

 

Assembly of Counter Rotating Stirrer to Drives.

 

PATTERSON® Autoclave type Double Motion Jacketed Grease Kettle, counter rotating Agitator Stirrer, 4350 USG – 16464 litres with 20 and 30 HP motors including VFD control package with touch screen.

 

Shell under construction.  Seams being ground flush with automatic grinding machine.

 

Shell being welded by automatic welding system.

 

Top head flange being machined on vertical boring mill.

 

Double Motion Counter Rotating Stirrer under construction

 

Main Touch Screen on Control System Cabinet.  This Screen shows the current information during the process cycle such as inner Stirrer and outer Stirrer motor amperage drawn, actual inner and outer shaft output speed, grease temperature and grease circulating temperature.

This screen also has the appropriate start and stop buttons to start and stop the double motion counter rotating stirrers in HIGH or LOW speed at the default rpm ratio as set by the supervisor.  Certain interlocks are also built in the system to prevent the system being started when any bottom valve is in open condition.

 

 

PATTERSON® Grease Kettle installed - View from mezzanine.

 

 

 

 

 

 

 

 

Mezzanine Side View with Piping.

 

 

Mezzanine Back View.

 

Close-up of PATTERSON® Grease Kettle at Mezzanine Level.

 

Close-up of Touch Screen on Control Panel.

 

Satellite Control Station with Touch Screens.

 

View of Control Cabinet with Adjacent Touch Screen Panel.

 

Close-up of Control Cabinet with adjacent Touch Screen Panel.

 

Local Discharge Valve Control to by-pass remote Centre Touch Control Panel.

 

PATTERSON® Atmospheric type 18,000 lb working capacity Jacketed Grease Finishing/Cooling Kettle, Jacket Pressure 60 psig at 400°F (205°C), complete with Double Motion Stirrer and Variable Frequency Drive Control Package mounted in NEMA 12 Cabinet

 

Close up of VFD Control Cabinet

 

PATTERSON® Atmospheric type 3200 USG working capacity Jacketed Grease Finishing/Cooling Kettle with PATTERSON® Double Motion Counter Rotating Agitator and Load Cell arrangement

 

Inside view of PATTERSON® Double Motion Counter Rotating Agitator Stirrer Arrangement with patented PATTERSON® Product Loaded Scrapers

 

PATTERSON® Grease Finishing/Cooling Kettle ready for shipment

 

PATTERSON® Autoclave type 7 metric tonne working capacity Single Motion Non-Jacketed Grease Buffer Vessel

 

PATTERSON® Autoclave type 18,000 lb (2400 USG) working capacity Jacketed Grease Kettle with counter rotating Agitator Stirrer with 40/30 HP explosion proof Gear Drives

 

Close-up of Mechanical Seal Lubricating/Cooling unit

 

Close-up of Thermocouple Probe to be installed at bottom head of Kettle

 

PATTERSON® Grease Kettle loaded on flatbed truck ready to be tied down and shipped
PATTERSON® Autoclave type 18000 lb (2400 USG) Grease Kettle  installed on mezzanine floor in Grease Plant.

 

PATTERSON® Atmospheric type 1800 lb workign capacity Jacketed Grease Finishing/Cooling Kettle with Double Motion Counter Rotating Agitator Stirrer, 40/30 HP complete with Variable Frequency Drive Control.

 

PATTERSON® 1800 lb capacity Jacketed Grease Finishing/Cooling Kettle ready for shipment

 

Front view of Free Standing Variable Frequency Control Cabinet.

 

Front/side view of VF Control Cabinet.
PATTERSON® Autoclave type Double Motion Jacketed Grease Kettle with semi elliptical top and bottom head, counter rotating Agitator Stirrer, 4350 USG – 16464 litres working capacity for very high viscosity grease, with 30 and 50 HP motors.
Close-up of heavy duty double motion Gear Drives.
Mounted on truck for shipment.
Leaving PATTERSON plant.